P0562 — System voltage too low
Severity: Warning
Can you drive? With caution: limp mode possible, have it checked soon
Make: All makes (OBD-II standard)
| Meaning | The ECU is running below its minimum supply voltage. When voltage wanders, odd codes appear all over the car: always fix this one first. |
| Family | Powertrain (P) |
Typical symptoms
Multiple warning lights with no logic
Weak starting
Electronics resetting
Battery going flat overnight
Weak starting
Electronics resetting
Battery going flat overnight
Common causes
Battery at end of life or corroded terminals
Faulty alternator or regulator
Slack accessory belt
Loose engine earth strap
Parasitic drain with ignition off
Faulty alternator or regulator
Slack accessory belt
Loose engine earth strap
Parasitic drain with ignition off
What to do
Start with battery, terminals and earths, because unstable voltage creates false codes on other systems: chasing those before fixing the supply wastes both time and money.
Frequently asked questions
What does code P0562 mean?
System voltage too low. The ECU is running below its minimum supply voltage. When voltage wanders, odd codes appear all over the car: always fix this one first.
Can I keep driving with code P0562 active?
With caution: limp mode possible, have it checked soon
Common causes — P0562
Battery at end of life or corroded terminals Faulty alternator or regulator Slack accessory belt Loose engine earth strap Parasitic drain with ignition off
How do you fix code P0562?
Start with battery, terminals and earths, because unstable voltage creates false codes on other systems: chasing those before fixing the supply wastes both time and money.
Need help with this fault?
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Contact us
Where to get it fixed
Related codes
- P0500 — Vehicle Speed Sensor Malfunction
- P0501 — Vehicle speed sensor: implausible value
- P0502 — Vehicle Speed Sensor Circuit Low Input
- P0503 — Vehicle Speed Sensor Intermittent/Erratic/High
- P0504 — Brake Switch Correlation Error
- P0505 — Idle Control System Malfunction
- P0506 — Idle Control System RPM lower Than Expected
- P0507 — Idle Control System RPM Higher Than Expected
- P0508 — Idle Air Control System Circuit Low
- P0509 — Idle Air Control System Circuit High
- P0510 — Closed Throttle Position Switch Malfunction
- P0511 — Idle Air Control Circuit