Skip to content
Fault code dictionary (DTC)

B2447 — RESCU/VEMS input circuit shorted to battery voltage

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has detected that the RESCU/VEMS input signal, tied to an emergency or messaging system, is connected to battery positive. This code is manufacturer-defined and I don't have reliable information on the exact function on your make. The signal wire is touching a power supply where it should not.
FamilyBody (B)

Typical symptoms

Warning light or message about the emergency system
Emergency function not working or activating on its own
No effect on driving
Fault appearing after electrical work or fitted accessories

Common causes

Signal wire touching a power cable
Wiring with damaged insulation
Connector with water or corrosion
Connected module faulty
Badly fitted accessory

What to do

Look for pinched wiring, damaged insulation or recently fitted accessories near the wire's route. It usually won't stop the car, but a short to positive should be checked soon to avoid damage to the wiring. A make-specific diagnosis is needed.

How to read code B2447

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code B2447 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B2447 mean?

RESCU/VEMS input circuit shorted to battery voltage. The control unit has detected that the RESCU/VEMS input signal, tied to an emergency or messaging system, is connected to battery positive. This code is manufacturer-defined and I don't have reliable information on the exact function on your make. The signal wire is touching a power supply where it should not.

Can I keep driving with code B2447 active?

With caution: limp mode possible, have it checked soon

Common causes — B2447

Signal wire touching a power cable Wiring with damaged insulation Connector with water or corrosion Connected module faulty Badly fitted accessory

How do you fix code B2447?

Look for pinched wiring, damaged insulation or recently fitted accessories near the wire's route. It usually won't stop the car, but a short to positive should be checked soon to avoid damage to the wiring. A make-specific diagnosis is needed.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes