Skip to content
Fault code dictionary (DTC)

B2493 — Left front park lamp circuit shorted to battery voltage

Severity: Informational Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe body control module detected battery voltage on the output driving the left front parking lamp when it should not be there. A wire in the circuit is probably touching a power feed, or the lamp socket is damaged. The exact meaning is still set by the manufacturer.
FamilyBody (B)

Typical symptoms

Left parking lamp stays on or will not turn off
Left parking lamp does not work
Lighting fault message or warning light
Blown fuse on the lighting circuit
Lights behaving irregularly

Common causes

Chafed wire touching a power feed
Water or corrosion in the socket or connector
Unsuitable bulb or LED
Wiring damaged after an impact or repair
Faulty body control module, less common

What to do

Check the left headlight, its socket and connector for moisture or bare wires. Make sure the parking lamp works, since it is there to make you visible. Have it checked soon to avoid blown fuses.

How to read code B2493

This is an informational entry: it normally does not limit how the vehicle works.

The code B2493 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B2493 mean?

Left front park lamp circuit shorted to battery voltage. The body control module detected battery voltage on the output driving the left front parking lamp when it should not be there. A wire in the circuit is probably touching a power feed, or the lamp socket is damaged. The exact meaning is still set by the manufacturer.

Can I keep driving with code B2493 active?

With caution: limp mode possible, have it checked soon

Common causes — B2493

Chafed wire touching a power feed Water or corrosion in the socket or connector Unsuitable bulb or LED Wiring damaged after an impact or repair Faulty body control module, less common

How do you fix code B2493?

Check the left headlight, its socket and connector for moisture or bare wires. Make sure the parking lamp works, since it is there to make you visible. Have it checked soon to avoid blown fuses.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes