Skip to content
Fault code dictionary (DTC)

B2495 — Anti-theft horn output circuit failure

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe body control module detected a general fault in the circuit that drives the anti-theft horn. The reference description does not say whether it is an open wire, a short or something else, and the code is manufacturer-defined. The exact cause has to be found with a test on the circuit.
FamilyBody (B)

Typical symptoms

Anti-theft horn does not sound when it should
Horn sounds abnormally
Alarm gives no audible signal
The normal horn does not work
Anti-theft fault message on some models

Common causes

Broken wire or unplugged connector
Faulty horn
Faulty horn relay
Corroded or wet connector
Faulty body control module, less common

What to do

Try the normal horn: if it does not sound, check the fuse, relay and connector. The horn is needed on the road, so do not put it off for long. If it works but the alarm gives no audible signal, it is less urgent.

How to read code B2495

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code B2495 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B2495 mean?

Anti-theft horn output circuit failure. The body control module detected a general fault in the circuit that drives the anti-theft horn. The reference description does not say whether it is an open wire, a short or something else, and the code is manufacturer-defined. The exact cause has to be found with a test on the circuit.

Can I keep driving with code B2495 active?

With caution: limp mode possible, have it checked soon

Common causes — B2495

Broken wire or unplugged connector Faulty horn Faulty horn relay Corroded or wet connector Faulty body control module, less common

How do you fix code B2495?

Try the normal horn: if it does not sound, check the fuse, relay and connector. The horn is needed on the road, so do not put it off for long. If it works but the alarm gives no audible signal, it is less urgent.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes