Skip to content
Fault code dictionary (DTC)

B2499 — Courtesy lamp output circuit failure

Severity: Informational Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe body control module detected a general fault in the circuit that drives the interior courtesy lamp. The reference description does not say whether it is an open wire, a short or something else, and the code is manufacturer-defined. It is a comfort fault, not an engine one.
FamilyBody (B)

Typical symptoms

Interior light does not come on when the doors open
Interior light stays on
Intermittent lighting
Dead battery after the car sits
Lighting fault message on some models

Common causes

Burned-out bulb
Dirty or faulty door switch
Corroded connector or socket
Wire broken or damaged in the door pillar
Faulty body control module, less common

What to do

Check the bulb, the door switches and the dome light switch. If the light stays on, turn it off by hand and have it checked soon so it does not drain the battery. Otherwise it is not urgent.

How to read code B2499

This is an informational entry: it normally does not limit how the vehicle works.

The code B2499 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B2499 mean?

Courtesy lamp output circuit failure. The body control module detected a general fault in the circuit that drives the interior courtesy lamp. The reference description does not say whether it is an open wire, a short or something else, and the code is manufacturer-defined. It is a comfort fault, not an engine one.

Can I keep driving with code B2499 active?

With caution: limp mode possible, have it checked soon

Common causes — B2499

Burned-out bulb Dirty or faulty door switch Corroded connector or socket Wire broken or damaged in the door pillar Faulty body control module, less common

How do you fix code B2499?

Check the bulb, the door switches and the dome light switch. If the light stays on, turn it off by hand and have it checked soon so it does not drain the battery. Otherwise it is not urgent.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes