Skip to content
Fault code dictionary (DTC)

B2503 — Right front low beam circuit failure

Severity: Informational Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe body control module detected a fault in the right low beam circuit. The reference description does not say whether it is an open wire, a short or a bulb, and the code is manufacturer-defined. The fault affects a light that is important for night safety.
FamilyBody (B)

Typical symptoms

Right low beam does not light
Right low beam flickers
Lighting fault message or warning light
Poorer road lighting on one side
Blown low beam fuse

Common causes

Burned-out bulb
Corroded or burned connector or socket
Broken or damaged wire
Faulty fuse or relay
Faulty body control module or lighting module

What to do

First check the bulb and the connector of the right headlight, then the fuse. Driving at night with a low beam out is dangerous and can earn a fine, so fix it as soon as you can.

How to read code B2503

This is an informational entry: it normally does not limit how the vehicle works.

The code B2503 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B2503 mean?

Right front low beam circuit failure. The body control module detected a fault in the right low beam circuit. The reference description does not say whether it is an open wire, a short or a bulb, and the code is manufacturer-defined. The fault affects a light that is important for night safety.

Can I keep driving with code B2503 active?

With caution: limp mode possible, have it checked soon

Common causes — B2503

Burned-out bulb Corroded or burned connector or socket Broken or damaged wire Faulty fuse or relay Faulty body control module or lighting module

How do you fix code B2503?

First check the bulb and the connector of the right headlight, then the fuse. Driving at night with a low beam out is dangerous and can earn a fine, so fix it as soon as you can.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes