P1748 — Transmission Control Module Self Test
| Meaning | Transmission Control Module Self Test. |
| Family | Powertrain (P) |
How to read code P1748
Code P1748 is a native BMW code: it is stored by the vehicle control unit and is read with a diagnostic tool that supports the manufacturer protocol, not with a generic OBD reader. This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P1748 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the manufacturer, so the exact meaning can change from make to make. The third character (7) points to transmission, and the last two (48) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P1748 mean?
Transmission Control Module Self Test.
Can I keep driving with code P1748 active?
With caution: limp mode possible, have it checked soon
How do you fix code P1748?
Diagnosis starts from reading the live ECU parameters: the code points to the fault area, not to the part to replace. A vehicle-electronics specialist can test the component and clear the code after the repair.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P1747 — CAN Bus Monitoring
- Next code: P1749 — Secondary Pressure Solenoid Communication Error
Related codes
- P1734 — Pressure Control Solenoid B Electrical
- P1738 — Pressure Control Solenoid C Electrical
- P1743 — Pressure Control Solenoid E Electrical
- P1744 — Pressure Control Solenoid A Electrical
- P1746 — Transmission Control Module Output Stage
- P1747 — CAN Bus Monitoring
- P1749 — Secondary Pressure Solenoid Communication Error
- P1750 — Secondary Pressure Solenoid Circuit Range Performance
- P1751 — Secondary Pressure Solenoid Open Circuit
- P1761 — Shift Solenoid Malfunction
- P1765 — CAN Throttle Valve
- P1770 — CAN Torque Interface