C1741 — Right front center sensor: signal fault
| Meaning | The control unit reports a fault in the circuit of the right front center sensor, probably a parking sensor. Compared with the previous code, it points to an incorrect signal rather than a clear circuit failure. The code is manufacturer-defined and I have no reliable information on exactly what triggers it for every brand. |
| Family | Chassis (C) |
Typical symptoms
Sensor reporting obstacles that are not there
Sensor failing to report real obstacles
Parking assist partly or fully disabled
Common causes
Connector with a weak contact
Wiring with damaged insulation
Faulty sensor or sensor loose in its mount
Problem in the system control unit
What to do
How to read code C1741
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code C1741 starts with C: it belongs to the chassis (brakes, steering, suspension) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code C1741 mean?
Right front center sensor: signal fault. The control unit reports a fault in the circuit of the right front center sensor, probably a parking sensor. Compared with the previous code, it points to an incorrect signal rather than a clear circuit failure. The code is manufacturer-defined and I have no reliable information on exactly what triggers it for every brand.
Can I keep driving with code C1741 active?
With caution: limp mode possible, have it checked soon
Common causes — C1741
Sensor dirty or covered in ice or mud Connector with a weak contact Wiring with damaged insulation Faulty sensor or sensor loose in its mount Problem in the system control unit
How do you fix code C1741?
Clean the sensor and check that it is not loose or damaged. If the code returns, have the wiring and connector tested. The car can be driven, but do not trust the parking assist.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: C1740 — Right front center sensor: circuit failure
- Next code: C1742 — Rear sounder: circuit failure
Related codes
- C1700 — Left rear sensor circuit failure
- C1701 — Left rear sensor circuit fault
- C1702 — Right rear sensor circuit: short to battery positive
- C1703 — Right rear sensor circuit failure
- C1704 — Right rear sensor circuit fault
- C1705 — Left rear center sensor circuit: short to battery positive
- C1706 — Left rear center sensor circuit failure
- C1707 — Left rear center sensor circuit fault
- C1708 — Right rear center sensor circuit: short to battery positive
- C1709 — Right rear center sensor circuit failure
- C1710 — Right rear center sensor circuit fault
- C1711 — Left front sensor circuit: short to battery positive