P1877 — Fault in CAN communication with engine electronics
| Meaning | Fault in CAN communication with engine electronics. |
| Family | Powertrain (P) |
How to read code P1877
Code P1877 is a native Mercedes-Benz code: it is stored by the vehicle control unit and is read with a diagnostic tool that supports the manufacturer protocol, not with a generic OBD reader. This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.
The code P1877 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the manufacturer, so the exact meaning can change from make to make. The third character (8) points to transmission, and the last two (77) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P1877 mean?
Fault in CAN communication with engine electronics.
Can I keep driving with code P1877 active?
With caution: limp mode possible, have it checked soon
How do you fix code P1877?
Diagnosis starts from reading the live ECU parameters: the code points to the fault area, not to the part to replace. A vehicle-electronics specialist can test the component and clear the code after the repair.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P1876 — Fault in CAN communication with traction system
- Next code: P1878 — Fault in CAN communication with air conditioning
Related codes
- P1813 — clutch switch (S40/3) discontinuity,short circuit to ground
- P1817 — 001 reversing light switch S16/10s1 contact point short circ...
- P1819 — 001 R/P lock contact switch short circuit to ground
- P1822 — kickdown switch (S16/6) error
- P1840 — 1-4 shift solenoid valve Y3/7y1
- P1841 — Solenoid valve Y3/7y2 3 shift
- P1842 — Solenoid valve Y3/7y3 2-5-R shift
- P1843 — Torque converter lockup clutch (KUeB) Y3/7y4
- P1844 — Control solenoid valve Y3/7y5 shift pressure
- P1849 — Speed sensors supply voltage < 4 V
- P1850 — Transmission rpm sensor Y3/7n1
- P1856 — 000 process recognition module