P0520 — Engine Oil Pressure Sensor Circuit Malfunction
| Meaning | The engine control unit has detected an abnormal voltage signal from the engine oil pressure sensor or its circuit. This means the computer is not receiving reliable data about the oil pressure inside your engine. |
| Family | Powertrain (P) |
Typical symptoms
Engine oil pressure gauge reads incorrectly or drops to zero
Check Engine Light is on
Common causes
Corraded, damaged, or loose electrical connector or wiring
Internal engine mechanical issues affecting oil pressure
What to do
How to read code P0520
This is a critical fault: vehicle safety or integrity may be compromised, so diagnosis should not be postponed.
The code P0520 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (20) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0520 mean?
Engine Oil Pressure Sensor Circuit Malfunction. The engine control unit has detected an abnormal voltage signal from the engine oil pressure sensor or its circuit. This means the computer is not receiving reliable data about the oil pressure inside your engine.
Can I keep driving with code P0520 active?
No: stop the vehicle and call a technician
Common causes — P0520
Faulty engine oil pressure switch or sensor Corraded, damaged, or loose electrical connector or wiring Internal engine mechanical issues affecting oil pressure
How do you fix code P0520?
Do not ignore this warning, as proper oil pressure is critical for engine survival. Check the oil level first, and have a mechanic inspect the sensor wiring and test the actual oil pressure with a manual gauge as soon as possible.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P051D — CRANKCASE PRESSURE SENSOR CIRCUIT HIGH
- Next code: P0521 — Engine Oil Pressure Sensor/Switch Range/Performanc...
Related codes
- P0500 — Vehicle Speed Sensor Malfunction
- P0501 — Vehicle speed sensor: implausible value
- P0502 — Vehicle Speed Sensor Circuit Low Input
- P0503 — Vehicle Speed Sensor Intermittent/Erratic/High
- P0504 — Brake Switch Correlation Error
- P0505 — Idle Control System Malfunction
- P0506 — Idle Control System RPM lower Than Expected
- P0507 — Idle Control System RPM Higher Than Expected
- P0508 — Idle Air Control System Circuit Low
- P0509 — Idle Air Control System Circuit High
- P0510 — Closed Throttle Position Switch Malfunction
- P0511 — Idle Air Control Circuit