P0571 — Brake Switch A Circuit Malfunctioning
| Meaning | The engine computer has detected an issue with the main brake pedal switch circuit. This switch tells the computer when you are stepping on the brake pedal, which affects cruise control and other vehicle systems. |
| Family | Powertrain (P) |
Typical symptoms
The brake lights may stay on all the time or fail to light up when pressing the pedal
The traction control or stability control warning light may turn on
Common causes
Blown fuse related to the brake light circuit
Corroded or damaged wiring and electrical connectors at the pedal switch
What to do
How to read code P0571
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0571 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (71) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0571 mean?
Brake Switch A Circuit Malfunctioning. The engine computer has detected an issue with the main brake pedal switch circuit. This switch tells the computer when you are stepping on the brake pedal, which affects cruise control and other vehicle systems.
Can I keep driving with code P0571 active?
With caution: limp mode possible, have it checked soon
Common causes — P0571
A faulty or misadjusted brake pedal switch Blown fuse related to the brake light circuit Corroded or damaged wiring and electrical connectors at the pedal switch
How do you fix code P0571?
Check the operation of your brake lights first to see if they work normally when pressing the pedal. You should have this checked soon, as a failing brake switch affects safety systems and brake light signaling for drivers behind you.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0570 — Cruise Control Accel Signal Malfunction
- Next code: P0572 — Cruise Control/Brake Switch A Circuit Low
Related codes
- P0500 — Vehicle Speed Sensor Malfunction
- P0501 — Vehicle speed sensor: implausible value
- P0502 — Vehicle Speed Sensor Circuit Low Input
- P0503 — Vehicle Speed Sensor Intermittent/Erratic/High
- P0504 — Brake Switch Correlation Error
- P0505 — Idle Control System Malfunction
- P0506 — Idle Control System RPM lower Than Expected
- P0507 — Idle Control System RPM Higher Than Expected
- P0508 — Idle Air Control System Circuit Low
- P0509 — Idle Air Control System Circuit High
- P0510 — Closed Throttle Position Switch Malfunction
- P0511 — Idle Air Control Circuit