P0591 — Cruise control: multi-function input B range/performance
| Meaning | The control unit found that the signal on cruise control input B has values that are wrong or do not match what is expected. The switch is reading something abnormal, but it is neither stuck nor completely off. The exact definition depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Controls responding wrongly
Cruise control or check engine light on
Sudden cancelling of the set speed
Unreliable steering wheel buttons
Common causes
Altered resistance or internal contacts in the switch
Corroded or loose connectors
Worn steering wheel clockspring
Partly damaged wiring
Module reading the input with a fault
What to do
How to read code P0591
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0591 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (91) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0591 mean?
Cruise control: multi-function input B range/performance. The control unit found that the signal on cruise control input B has values that are wrong or do not match what is expected. The switch is reading something abnormal, but it is neither stuck nor completely off. The exact definition depends on the manufacturer.
Can I keep driving with code P0591 active?
With caution: limp mode possible, have it checked soon
Common causes — P0591
Dirty or worn buttons giving wrong values Altered resistance or internal contacts in the switch Corroded or loose connectors Worn steering wheel clockspring Partly damaged wiring Module reading the input with a fault
How do you fix code P0591?
Have connectors, buttons and the clockspring checked first, then the switch signal measured with a tool. There is no immediate driving risk, but treat the cruise control as unreliable until it is repaired.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0590 — Cruise control: multi-function input B stuck
- Next code: P0592 — Cruise control: multi-function input B circuit low
Related codes
- P0500 — Vehicle Speed Sensor Malfunction
- P0501 — Vehicle speed sensor: implausible value
- P0502 — Vehicle speed sensor circuit low input
- P0503 — Vehicle speed sensor intermittent, erratic or high
- P0504 — Brake Switch Correlation Error
- P0505 — Idle Control System Malfunction
- P0506 — Idle speed lower than expected
- P0507 — Idle Control System RPM Higher Than Expected
- P0508 — Idle air control circuit low
- P0509 — Idle air control circuit high
- P050A — Cold start idle control system performance
- P050B — Cold start ignition timing performance