P0594 — Cruise control servo control circuit open
| Meaning | The control unit detected a break in the circuit that drives the cruise control servo, the actuator that moves the throttle to hold speed. This part is only fitted to some vehicles. Without it the cruise control cannot work. |
| Family | Powertrain (P) |
Typical symptoms
Cruise control or check engine light on
Set speed not being held
Function cancelling at once
No sound or movement from the servo
Common causes
Servo connector unplugged or corroded
Servo faulty internally
Missing fuse or supply to the circuit
Control module not driving the servo
What to do
How to read code P0594
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0594 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (94) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0594 mean?
Cruise control servo control circuit open. The control unit detected a break in the circuit that drives the cruise control servo, the actuator that moves the throttle to hold speed. This part is only fitted to some vehicles. Without it the cruise control cannot work.
Can I keep driving with code P0594 active?
With caution: limp mode possible, have it checked soon
Common causes — P0594
Broken servo wiring Servo connector unplugged or corroded Servo faulty internally Missing fuse or supply to the circuit Control module not driving the servo
How do you fix code P0594?
Have the fuse, connector and wire continuity to the servo checked first. It does not affect normal driving, but the cruise control stays unusable.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0593 — Cruise control: multi-function input B circuit hig...
- Next code: P0595 — Cruise control servo control circuit low
Related codes
- P0500 — Vehicle Speed Sensor Malfunction
- P0501 — Vehicle speed sensor: implausible value
- P0502 — Vehicle speed sensor circuit low input
- P0503 — Vehicle speed sensor intermittent, erratic or high
- P0504 — Brake Switch Correlation Error
- P0505 — Idle Control System Malfunction
- P0506 — Idle speed lower than expected
- P0507 — Idle Control System RPM Higher Than Expected
- P0508 — Idle air control circuit low
- P0509 — Idle air control circuit high
- P050A — Cold start idle control system performance
- P050B — Cold start ignition timing performance