Skip to content
Fault code dictionary (DTC)

P05AD — Active grille shutter B: position sensor intermittent

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe position sensor signal for the front grille shutters (bank B) comes and goes. The control unit saw the reading disappear or jump for brief moments. It is often an unstable electrical contact, which can get worse over time.
FamilyPowertrain (P)

Typical symptoms

Check engine light that comes on and sometimes goes off
Shutters working intermittently
Problem more frequent with vibration, rain or humidity
Engine temperature not always steady
Radiator fans switching on irregularly

Common causes

Connector with corroded or loose contacts
Sensor wire partly broken
Wiring that moves or rubs near the grille
Water or moisture in the connector
Position sensor with an intermittent fault
Actuator that needs replacing as a unit

What to do

Carefully move the wiring and connector of the bank B actuator while watching the reading on a scan tool: if it changes, you have found the area. Also look for signs of moisture. It is better to act before the fault becomes permanent.

How to read code P05AD

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P05AD starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (AD) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P05AD mean?

Active grille shutter B: position sensor intermittent. The position sensor signal for the front grille shutters (bank B) comes and goes. The control unit saw the reading disappear or jump for brief moments. It is often an unstable electrical contact, which can get worse over time.

Can I keep driving with code P05AD active?

With caution: limp mode possible, have it checked soon

Common causes — P05AD

Connector with corroded or loose contacts Sensor wire partly broken Wiring that moves or rubs near the grille Water or moisture in the connector Position sensor with an intermittent fault Actuator that needs replacing as a unit

How do you fix code P05AD?

Carefully move the wiring and connector of the bank B actuator while watching the reading on a scan tool: if it changes, you have found the area. Also look for signs of moisture. It is better to act before the fault becomes permanent.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes