Skip to content
Fault code dictionary (DTC)

P05B7 — Active grille shutter B supply voltage high

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit measured a supply voltage that is too high at active grille shutter B. Excess voltage can damage the actuator electronics. The fault may lie in the shutter circuit or in the charging system.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Shutters moving erratically or not responding
Coolant temperature outside the normal range
Other high voltage codes
Lights or gauges changing brightness if charging is faulty

Common causes

Faulty alternator or voltage regulator
Supply wire touching a higher voltage line
Internal failure in the shutter module
Wiring or connector problem
Engine control unit, which is rare

What to do

Have the charging voltage checked with the engine running, since values that are too high can damage other parts. Then the wiring and shutter module should be verified. It is best to act soon.

How to read code P05B7

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P05B7 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (B7) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P05B7 mean?

Active grille shutter B supply voltage high. The control unit measured a supply voltage that is too high at active grille shutter B. Excess voltage can damage the actuator electronics. The fault may lie in the shutter circuit or in the charging system.

Can I keep driving with code P05B7 active?

With caution: limp mode possible, have it checked soon

Common causes — P05B7

Faulty alternator or voltage regulator Supply wire touching a higher voltage line Internal failure in the shutter module Wiring or connector problem Engine control unit, which is rare

How do you fix code P05B7?

Have the charging voltage checked with the engine running, since values that are too high can damage other parts. Then the wiring and shutter module should be verified. It is best to act soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes