P05BB — Restraints deployed (airbags or belt pretensioners)
| Meaning | The engine control unit received information that the restraint systems, meaning airbags and belt pretensioners, have deployed. This usually means there was a crash. For safety the control unit may cut the fuel supply and stop the engine. |
| Family | Powertrain (P) |
Typical symptoms
Airbag warning light on
Check engine light on
Fuel pump not active
Visible crash damage or opened airbags
Common causes
Restraint deployment after even a minor accident
Wrong signal from the airbag module, less common
Electrical fault on the signal circuit, less common
What to do
How to read code P05BB
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P05BB starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (BB) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P05BB mean?
Restraints deployed (airbags or belt pretensioners). The engine control unit received information that the restraint systems, meaning airbags and belt pretensioners, have deployed. This usually means there was a crash. For safety the control unit may cut the fuel supply and stop the engine.
Can I keep driving with code P05BB active?
With caution: limp mode possible, have it checked soon
Common causes — P05BB
Impact that triggered airbags or pretensioners Restraint deployment after even a minor accident Wrong signal from the airbag module, less common Electrical fault on the signal circuit, less common
How do you fix code P05BB?
If there was an impact, do not keep trying to start it, check first for any smell of fuel, and have the car transported to a workshop. After an airbag deployment the system must be inspected and reset by qualified staff. If there was no impact, a diagnosis of the airbag system is needed.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P05BA — Restraint deployment signal circuit, signal high
- Next code: P05BC — Stop-start mode switch circuit open
Related codes
- P0500 — Vehicle Speed Sensor Malfunction
- P0501 — Vehicle speed sensor: implausible value
- P0502 — Vehicle speed sensor circuit low input
- P0503 — Vehicle speed sensor intermittent, erratic or high
- P0504 — Brake Switch Correlation Error
- P0505 — Idle Control System Malfunction
- P0506 — Idle speed lower than expected
- P0507 — Idle Control System RPM Higher Than Expected
- P0508 — Idle air control circuit low
- P0509 — Idle air control circuit high
- P050A — Cold start idle control system performance
- P050B — Cold start ignition timing performance