Skip to content
Fault code dictionary (DTC)

P05C5 — Engine coolant pressure sensor circuit high

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit read a higher voltage than expected from the coolant pressure sensor. It may be an electrical fault in the sensor or wiring, or genuinely too high a pressure in the circuit.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
High or unstable coolant temperature
Very hard or swollen radiator hoses
Leaks or spray from the expansion tank
Other cooling system codes

Common causes

Signal wire touching a power supply
Faulty sensor
Damaged connector
Faulty cap or overpressure valve
Combustion gases in the circuit, a more serious and less common cause

What to do

Never open the tank cap with a hot engine. Have the circuit and sensor checked soon, because a genuinely high pressure can damage hoses and the radiator. If the temperature rises or coolant escapes, stop driving.

How to read code P05C5

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P05C5 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (C5) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P05C5 mean?

Engine coolant pressure sensor circuit high. The control unit read a higher voltage than expected from the coolant pressure sensor. It may be an electrical fault in the sensor or wiring, or genuinely too high a pressure in the circuit.

Can I keep driving with code P05C5 active?

With caution: limp mode possible, have it checked soon

Common causes — P05C5

Signal wire touching a power supply Faulty sensor Damaged connector Faulty cap or overpressure valve Combustion gases in the circuit, a more serious and less common cause

How do you fix code P05C5?

Never open the tank cap with a hot engine. Have the circuit and sensor checked soon, because a genuinely high pressure can damage hoses and the radiator. If the temperature rises or coolant escapes, stop driving.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes