P05E0 — Brake pedal sensors A and B: signals do not agree
| Meaning | The control unit compares the two brake pedal sensors (A and B) and finds that they don't report the same thing. Since they should agree, it can't tell which one is right. For safety it may limit some functions. |
| Family | Powertrain (P) |
Typical symptoms
Brake lights not matching pedal pressure
Cruise control disabled
Hard starting or no start
Start-stop disabled
Reduced power in some situations
Common causes
Sensors fitted or adjusted incorrectly after work
Connector or wiring of one sensor with abnormal resistance
Pedal bracket with play or deformation
Control unit (rare)
What to do
How to read code P05E0
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P05E0 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (E0) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P05E0 mean?
Brake pedal sensors A and B: signals do not agree. The control unit compares the two brake pedal sensors (A and B) and finds that they don't report the same thing. Since they should agree, it can't tell which one is right. For safety it may limit some functions.
Can I keep driving with code P05E0 active?
With caution: limp mode possible, have it checked soon
Common causes — P05E0
One of the two sensors out of adjustment or faulty Sensors fitted or adjusted incorrectly after work Connector or wiring of one sensor with abnormal resistance Pedal bracket with play or deformation Control unit (rare)
How do you fix code P05E0?
First have the brake lights checked for correct operation. Then the signals of both sensors should be compared with the pedal released and pressed, to find which one is wrong. Don't neglect it, as it involves a safety system.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P05DF — Brake pedal sensor B: intermittent or erratic sign...
- Next code: P05E1 — A/C refrigerant pressure sensor A: erratic signal
Related codes
- P0500 — Vehicle Speed Sensor Malfunction
- P0501 — Vehicle speed sensor: implausible value
- P0502 — Vehicle speed sensor circuit low input
- P0503 — Vehicle speed sensor intermittent, erratic or high
- P0504 — Brake Switch Correlation Error
- P0505 — Idle Control System Malfunction
- P0506 — Idle speed lower than expected
- P0507 — Idle Control System RPM Higher Than Expected
- P0508 — Idle air control circuit low
- P0509 — Idle air control circuit high
- P050A — Cold start idle control system performance
- P050B — Cold start ignition timing performance