Skip to content
Fault code dictionary (DTC)

P05F2 — Reductant pump supply circuit stuck off

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detects that the AdBlue pump supply stays off even when it is requested. The pump does not start and the fluid cannot be dosed.
FamilyPowertrain (P)

Typical symptoms

Check engine light or AdBlue warning on
Dashboard message about an emissions system fault
Warning about restart or power limitation
No pump hum after shutdown
Other AdBlue system codes stored

Common causes

Blown fuse on the pump circuit
Supply relay that does not close
Broken wire or disconnected connector
Faulty pump or control module
Problem in the control unit driving the supply

What to do

First check the fuses, relay and connectors of the AdBlue system. Without dosing, the emissions system does not work properly and the car may limit restarting, so don't put it off.

How to read code P05F2

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P05F2 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (F2) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P05F2 mean?

Reductant pump supply circuit stuck off. The control unit detects that the AdBlue pump supply stays off even when it is requested. The pump does not start and the fluid cannot be dosed.

Can I keep driving with code P05F2 active?

With caution: limp mode possible, have it checked soon

Common causes — P05F2

Blown fuse on the pump circuit Supply relay that does not close Broken wire or disconnected connector Faulty pump or control module Problem in the control unit driving the supply

How do you fix code P05F2?

First check the fuses, relay and connectors of the AdBlue system. Without dosing, the emissions system does not work properly and the car may limit restarting, so don't put it off.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes