Skip to content
Fault code dictionary (DTC)

P0601 — Internal Control Module Memory Check Sum Error

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine computer has run a self-test on its internal memory and found that the data checksum does not match what is expected. This means the internal software memory of the computer has corrupted data or a hardware failure inside the module has occurred.
FamilyPowertrain (P)

Typical symptoms

Check Engine light is on
Car may fail to start or crank
Engine may stall while driving
Erratic behavior from various dashboard gauges

Common causes

Corrupted software or firmware inside the engine computer
Failing or damaged internal engine control module hardware
Poor battery voltage or unstable ground supply causing memory write errors
Water intrusion or corrosion affecting the computer connectors

What to do

You should check the battery health, charging system voltage, and all ground connections first to rule out power supply issues. Address this promptly, as an internal computer failure can leave you stranded without warning.

How to read code P0601

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code P0601 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (01) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0601 mean?

Internal Control Module Memory Check Sum Error. The engine computer has run a self-test on its internal memory and found that the data checksum does not match what is expected. This means the internal software memory of the computer has corrupted data or a hardware failure inside the module has occurred.

Can I keep driving with code P0601 active?

With caution: limp mode possible, have it checked soon

Common causes — P0601

Corrupted software or firmware inside the engine computer Failing or damaged internal engine control module hardware Poor battery voltage or unstable ground supply causing memory write errors Water intrusion or corrosion affecting the computer connectors

How do you fix code P0601?

You should check the battery health, charging system voltage, and all ground connections first to rule out power supply issues. Address this promptly, as an internal computer failure can leave you stranded without warning.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes