Skip to content
Fault code dictionary (DTC)

P090B — Clutch B actuator control circuit performance

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control circuit of the clutch B actuator works, but the actuator's response is outside the values the control unit expects. It may be a slow or weak actuator, a worn clutch or a hydraulic problem. The code is typical of dual-clutch gearboxes.
FamilyPowertrain (P)

Typical symptoms

Engine or transmission warning light on
Jerks or hesitation when pulling away and shifting
Clutch slipping
Slow or harsh gear changes
Gearbox in limp mode

Common causes

Worn or slow clutch B actuator
Worn clutch
Hydraulic or lubrication problem
Unstable supply voltage
Clutch adaptation no longer correct

What to do

Check the battery and connectors, then have the actuator and clutch wear inspected at a workshop. Jerks and slipping can get worse quickly, so do not postpone.

How to read code P090B

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P090B starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (9) points to transmission, and the last two (0B) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P090B mean?

Clutch B actuator control circuit performance. The control circuit of the clutch B actuator works, but the actuator's response is outside the values the control unit expects. It may be a slow or weak actuator, a worn clutch or a hydraulic problem. The code is typical of dual-clutch gearboxes.

Can I keep driving with code P090B active?

With caution: limp mode possible, have it checked soon

Common causes — P090B

Worn or slow clutch B actuator Worn clutch Hydraulic or lubrication problem Unstable supply voltage Clutch adaptation no longer correct

How do you fix code P090B?

Check the battery and connectors, then have the actuator and clutch wear inspected at a workshop. Jerks and slipping can get worse quickly, so do not postpone.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes