P0E00 — Generator phase U current sensor circuit fault
| Meaning | The control unit found an electrical fault in the circuit of the sensor that measures the current on phase U of the generator. In hybrid cars the generator is three-phase and the control unit monitors each phase. If it can't read one phase properly, it can't control the generator safely. The details depend on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power or limp mode
Hard starting or engine stalling
Vibration or irregular running
Error message on the dashboard
Common causes
Faulty phase U current sensor
Internal fault in the inverter
Irregular sensor power or ground
Electrical problem in the generator
What to do
How to read code P0E00
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0E00 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0E00 mean?
Generator phase U current sensor circuit fault. The control unit found an electrical fault in the circuit of the sensor that measures the current on phase U of the generator. In hybrid cars the generator is three-phase and the control unit monitors each phase. If it can't read one phase properly, it can't control the generator safely. The details depend on the manufacturer.
Can I keep driving with code P0E00 active?
With caution: limp mode possible, have it checked soon
Common causes — P0E00
Damaged or corroded sensor connector or wiring Faulty phase U current sensor Internal fault in the inverter Irregular sensor power or ground Electrical problem in the generator
How do you fix code P0E00?
Have the live phase current data read and the sensor connectors and wiring checked. The circuit is tied to high voltage, so don't work on it yourself: if the car loses power or stalls, stop and rely on a qualified technician.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0DFF — Battery charger coolant valve control high signal
- Next code: P0E01 — Generator phase U current sensor out of range
Related codes
- P0E01 — Generator phase U current sensor out of range
- P0E02 — Generator phase U current sensor: signal too low
- P0E03 — Generator phase U current sensor: signal too high
- P0E04 — Generator phase V current sensor circuit fault
- P0E05 — Generator phase V current sensor: signal out of range
- P0E06 — Generator phase V current sensor: signal too low
- P0E07 — Generator phase V current sensor: signal too high
- P0E08 — Generator phase W current sensor circuit fault
- P0E09 — Generator phase W current sensor: signal out of range
- P0E0A — Generator phase W current sensor: signal too low
- P0E0B — Generator phase W current sensor: signal too high
- P0E0C — Generator phases U-V-W: open circuit