Skip to content
Fault code dictionary (DTC)

P1103 — Mass airflow (MAF) sensor in range but higher than expected

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThis code is manufacturer-defined. The reference definition, associated with Ford, indicates the MAF sensor gives a plausible value but higher than the control unit expects for that engine load. The unit may therefore meter fuel poorly. On other makes the meaning may differ.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Lean mixture with jerking or hesitation
Rough idle
Loss of power
Engine stalling at low speed

Common causes

Faulty or drifting MAF sensor
Contamination or oil on the sensing element
Connector or wiring with abnormal resistance
Intake or management problems altering the engine load
Power or ground problem at the sensor

What to do

Check the connector, wiring and the state of the intake, including any oil in the duct. Then have live data read. A lean mixture can stress the engine, so do not put it off too long.

How to read code P1103

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P1103 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the manufacturer, so the exact meaning can change from make to make. The third character (1) points to fuel and air metering, and the last two (03) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P1103 mean?

Mass airflow (MAF) sensor in range but higher than expected. This code is manufacturer-defined. The reference definition, associated with Ford, indicates the MAF sensor gives a plausible value but higher than the control unit expects for that engine load. The unit may therefore meter fuel poorly. On other makes the meaning may differ.

Can I keep driving with code P1103 active?

With caution: limp mode possible, have it checked soon

Common causes — P1103

Faulty or drifting MAF sensor Contamination or oil on the sensing element Connector or wiring with abnormal resistance Intake or management problems altering the engine load Power or ground problem at the sensor

How do you fix code P1103?

Check the connector, wiring and the state of the intake, including any oil in the duct. Then have live data read. A lean mixture can stress the engine, so do not put it off too long.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes