P1229 — Intercooler pump control circuit fault
| Meaning | P1229 is a manufacturer-defined code and I don't have reliable details on its exact meaning for every make. Going by the reference definition, the control unit has detected a fault in the circuit that drives the intercooler water pump, which cools the air coming from the turbo. |
| Family | Powertrain (P) |
Typical symptoms
Loss of power in hot weather or under load
Intake air hotter than normal
Possible performance reduction imposed by the control unit
Common causes
Pump connector or wiring corroded or broken
Faulty pump fuse or relay
Control unit or pump driver stage failure
Low coolant level or air in the intercooler circuit
What to do
How to read code P1229
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P1229 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the manufacturer, so the exact meaning can change from make to make. The third character (2) points to fuel and air metering (injector circuit), and the last two (29) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P1229 mean?
Intercooler pump control circuit fault. P1229 is a manufacturer-defined code and I don't have reliable details on its exact meaning for every make. Going by the reference definition, the control unit has detected a fault in the circuit that drives the intercooler water pump, which cools the air coming from the turbo.
Can I keep driving with code P1229 active?
With caution: limp mode possible, have it checked soon
Common causes — P1229
Intercooler pump failed or seized Pump connector or wiring corroded or broken Faulty pump fuse or relay Control unit or pump driver stage failure Low coolant level or air in the intercooler circuit
How do you fix code P1229?
First check the pump fuse, relay and connector, then see whether you can hear the pump run with the ignition on. Don't ignore it for long: an intercooler that isn't cooling makes the engine work under worse conditions.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P1228 — Wastegate stuck open, boost pressure too low
- Next code: P1230 — Fuel pump low-speed operation malfunction
Related codes
- P1200 — Injector control circuit fault
- P1201 — Cylinder 1 injector circuit open or shorted
- P1202 — Cylinder 2 injector circuit open or shorted
- P1203 — Cylinder 3 injector circuit open or shorted
- P1204 — Cylinder 4 injector circuit open or shorted
- P1205 — Cylinder 5 injector circuit open or shorted
- P1206 — Cylinder 6 injector circuit open or shorted
- P1209 — Injector control pressure system fault
- P1210 — Injector control pressure above expected level
- P1211 — Injector control pressure sensor out of range
- P1212 — Injector control pressure not detected during cranking
- P1213 — Start injector circuit malfunction