Skip to content
Fault code dictionary (DTC)

P1235 — Fuel pump control out of range

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningP1235 is a manufacturer-defined code and I don't have reliable details on its exact meaning for every make. Going by the reference definition, the fuel pump control signal is outside the expected values. The reference definition is identical to that of P1236, and without details on the make I cannot say for certain how the two codes are told apart.
FamilyPowertrain (P)

Typical symptoms

Fuel pressure too high or too low
Rough running or hesitation
Loss of power
Check engine light on

Common causes

Pump control wiring or connectors with a poor contact
Faulty pump control module
Worn fuel pump
Fuel pressure sensor giving a wrong reading
Power supply or ground problem

What to do

First check the connectors, power supply and ground of the pump and the real fuel pressure. If the engine runs badly or stalls, don't keep driving it.

How to read code P1235

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P1235 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the manufacturer, so the exact meaning can change from make to make. The third character (2) points to fuel and air metering (injector circuit), and the last two (35) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P1235 mean?

Fuel pump control out of range. P1235 is a manufacturer-defined code and I don't have reliable details on its exact meaning for every make. Going by the reference definition, the fuel pump control signal is outside the expected values. The reference definition is identical to that of P1236, and without details on the make I cannot say for certain how the two codes are told apart.

Can I keep driving with code P1235 active?

With caution: limp mode possible, have it checked soon

Common causes — P1235

Pump control wiring or connectors with a poor contact Faulty pump control module Worn fuel pump Fuel pressure sensor giving a wrong reading Power supply or ground problem

How do you fix code P1235?

First check the connectors, power supply and ground of the pump and the real fuel pressure. If the engine runs badly or stalls, don't keep driving it.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes