P1621 — Control module memory / immobilizer code words do not match
| Meaning | The control module found a problem in its long-term memory, or the immobilizer security codes don't match between modules. In practice the car can't be sure it recognises its own key or anti-theft system. The exact meaning depends on the make. |
| Family | Powertrain (P) |
Typical symptoms
Engine starts and stalls shortly after
Anti-theft or check engine light on
Starting sometimes works and sometimes not
Common causes
Key not programmed correctly
Communication problem with the immobilizer module
Low or unstable supply voltage that corrupted the memory
Internal module fault
What to do
How to read code P1621
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P1621 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the manufacturer, so the exact meaning can change from make to make. The third character (6) points to computer and output circuits, and the last two (21) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P1621 mean?
Control module memory / immobilizer code words do not match. The control module found a problem in its long-term memory, or the immobilizer security codes don't match between modules. In practice the car can't be sure it recognises its own key or anti-theft system. The exact meaning depends on the make.
Can I keep driving with code P1621 active?
With caution: limp mode possible, have it checked soon
Common causes — P1621
Module replaced or reprogrammed without matching the codes Key not programmed correctly Communication problem with the immobilizer module Low or unstable supply voltage that corrupted the memory Internal module fault
How do you fix code P1621?
Try the spare key and check the battery condition. If the car won't start, this needs checking soon, as it won't fix itself. You need a tool that handles code matching for your make.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P1620 — P1620: SBDS diagnostic system interactive code
- Next code: P1622 — Immobilizer ID does not match
Related codes
- P1600 — KAM power loss: open circuit
- P1601 — Serial communication error between engine and transmission c...
- P1602 — Immobilizer to engine computer communication error
- P1603 — Engine computer EEPROM memory malfunction
- P1604 — Security code word not registered
- P1605 — Keep alive memory test failure
- P1606 — Engine computer control relay output circuit fault
- P1607 — Check engine light output circuit fault
- P1608 — Engine computer internal malfunction
- P1609 — Diagnostic lamp driver fault
- P1610 — P1610: SBDS diagnostic system interactive code
- P1611 — P1611: SBDS diagnostic system interactive code