P1640 — Powertrain codes stored in another module
| Meaning | This code indicates that other engine or transmission codes are stored in a module other than the engine control unit. P1640 is a manufacturer-defined code and the reference definition is typical of Ford and related vehicles; for other brands I have no reliable information. It does not describe a fault by itself, but tells you to look for the problem elsewhere. |
| Family | Powertrain (P) |
Typical symptoms
Symptoms that depend on the real fault, which is not named here
Irregular engine or gearbox operation
Other warning lights on at the same time
No obvious symptom in some cases
Common causes
Communication problem between modules
A code stored but not yet read in another module
Wiring or power supply problem on a module
What to do
How to read code P1640
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P1640 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the manufacturer, so the exact meaning can change from make to make. The third character (6) points to computer and output circuits, and the last two (40) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P1640 mean?
Powertrain codes stored in another module. This code indicates that other engine or transmission codes are stored in a module other than the engine control unit. P1640 is a manufacturer-defined code and the reference definition is typical of Ford and related vehicles; for other brands I have no reliable information. It does not describe a fault by itself, but tells you to look for the problem elsewhere.
Can I keep driving with code P1640 active?
With caution: limp mode possible, have it checked soon
Common causes — P1640
A fault recorded in another module, for example the transmission one Communication problem between modules A code stored but not yet read in another module Wiring or power supply problem on a module
How do you fix code P1640?
Have the codes of all the vehicle's modules read, not just the engine one, because the real cause is there. Repair that fault before doing anything else. How urgent it is depends on what you find.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P1639 — Vehicle ID block corrupted or not programmed
- Next code: P1641 — Fuel pump primary circuit fault
Related codes
- P1600 — KAM power loss: open circuit
- P1601 — Serial communication error between engine and transmission c...
- P1602 — Immobilizer to engine computer communication error
- P1603 — Engine computer EEPROM memory malfunction
- P1604 — Security code word not registered
- P1605 — Keep alive memory test failure
- P1606 — Engine computer control relay output circuit fault
- P1607 — Check engine light output circuit fault
- P1608 — Engine computer internal malfunction
- P1609 — Diagnostic lamp driver fault
- P1610 — P1610: SBDS diagnostic system interactive code
- P1611 — P1611: SBDS diagnostic system interactive code