P1700 — Transmission Indeterminate Failure (Failed to Neutral)
| Meaning | Transmission Indeterminate Failure (Failed to Neutral). |
| Family | Powertrain (P) |
How to read code P1700
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P1700 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the manufacturer, so the exact meaning can change from make to make. The third character (7) points to transmission, and the last two (00) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P1700 mean?
Transmission Indeterminate Failure (Failed to Neutral).
Can I keep driving with code P1700 active?
With caution: limp mode possible, have it checked soon
How do you fix code P1700?
Diagnosis starts from reading the live ECU parameters: the code points to the fault area, not to the part to replace. A vehicle-electronics specialist can test the component and clear the code after the repair.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P1694 — Turbo Charge Relief Circuit Malfunction
- Next code: P1701 — Reverse Engagement Error
Related codes
- P1701 — Reverse Engagement Error
- P1702 — TRS Circuit Intermittent Malfunction
- P1703 — Brake Switch Out Of Self Test Range
- P1704 — Digital TRS Failed to Transition States in KOEO / KOER
- P1705 — Not in P or N During KOEO / KOER
- P1706 — High Vehicle Speed Observed in Park
- P1707 — Transfer Case Neutral Indicator Hard Fault Present
- P1708 — Clutch Switch Circuit Malfunction
- P1709 — PNP Switch Out Of Self Test Range
- P1711 — TFT Sensor Out Of Self Test Range
- P1712 — Trans Torque Reduction Request Signal Malfunction
- P1713 — TFT Sensor In Range Failure Low Value