P1820 — Transfer case clockwise shift relay coil circuit fault
| Meaning | The control unit detected a problem in the coil circuit of the relay that drives the transfer case motor in one direction, used to change the four-wheel-drive mode. The code is manufacturer-defined, so the precise meaning depends on the make. The mode change may not complete. |
| Family | Powertrain (P) |
Typical symptoms
Four-wheel drive does not engage or disengage
Mode change stops halfway
Noises or delays when changing mode
Four-wheel drive unavailable
Common causes
Corroded connector or fuse box
Damaged coil wiring
Poorly seated fuse
Faulty control unit (rare)
What to do
How to read code P1820
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P1820 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the manufacturer, so the exact meaning can change from make to make. The third character (8) points to transmission, and the last two (20) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P1820 mean?
Transfer case clockwise shift relay coil circuit fault. The control unit detected a problem in the coil circuit of the relay that drives the transfer case motor in one direction, used to change the four-wheel-drive mode. The code is manufacturer-defined, so the precise meaning depends on the make. The mode change may not complete.
Can I keep driving with code P1820 active?
With caution: limp mode possible, have it checked soon
Common causes — P1820
Faulty relay or worn contacts Corroded connector or fuse box Damaged coil wiring Poorly seated fuse Faulty control unit (rare)
How do you fix code P1820?
Have the relay, fuses and transfer case circuit connectors checked first. The car can usually be driven, but four-wheel drive may stay stuck in one mode, so be careful before difficult routes.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P1819 — Neutral safety switch shorted to ground
- Next code: P1821 — Transfer case clockwise shift relay coil open circ...
Related codes
- P1800 — Manufacturer-Specific Powertrain Fault Code P1800
- P1801 — Clutch interlock safety switch: open circuit
- P1802 — Clutch interlock safety switch: short to battery voltage
- P1803 — Clutch interlock safety switch: short to ground
- P1804 — 4WD High indicator circuit failure
- P1805 — 4WD High indicator: open circuit
- P1806 — 4WD High indicator: short to battery voltage
- P1807 — 4WD High indicator: short to ground
- P1808 — 4WD Low indicator circuit failure
- P1809 — 4WD Low indicator: open circuit
- P1810 — TFP valve position switch / 4WD Low indicator: short to batt...
- P1811 — 4WD Low indicator: short to ground