P1903 — Pressure Control Solenoid "C" Short Circuit
| Meaning | Pressure Control Solenoid "C" Short Circuit. |
| Family | Powertrain (P) |
How to read code P1903
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P1903 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the manufacturer, so the exact meaning can change from make to make. The third character (9) points to transmission, and the last two (03) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P1903 mean?
Pressure Control Solenoid "C" Short Circuit.
Can I keep driving with code P1903 active?
With caution: limp mode possible, have it checked soon
How do you fix code P1903?
Diagnosis starts from reading the live ECU parameters: the code points to the fault area, not to the part to replace. A vehicle-electronics specialist can test the component and clear the code after the repair.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P1902 — Pressure Control Solenoid "B" Intermittent Short
- Next code: P1904 — Pressure Control Solenoid "C" Open Circuit
Related codes
- P1900 — OSS Circuit Intermittent Malfunction
- P1901 — TSS Circuit Intermittent Malfunction
- P1902 — Pressure Control Solenoid "B" Intermittent Short
- P1904 — Pressure Control Solenoid "C" Open Circuit
- P1905 — Pressure Control Solenoid "C" Intermittent Short
- P1906 — Kickdown Pull Relay Open or Short Circuit to Ground
- P1907 — Kickdown Hold Relay Open or Short Circuit to Ground
- P1908 — Transmission Pressure Circuit Solenoid Open or Short to Grou...
- P1909 — Trans Temp Sensor Circuit Open or Shorted to Pwr or Gnd
- P1910 — VFS A Pressure Output Failed Low
- P1911 — VFS B Pressure Output Failed Low
- P1912 — VFS C Pressure Output Failed Low