P2000 — NOx trap efficiency below threshold, bank 1
| Meaning | The control unit detected that the system that stores and reduces nitrogen oxides (NOx trap, or NOx adsorber) on bank 1 is not working at the expected efficiency. This means part of the nitrogen oxides is passing into the exhaust untreated. Bank 1 is the side of the engine where cylinder number 1 is located. |
| Family | Powertrain (P) |
Typical symptoms
Fuel consumption slightly higher than normal
Possible failure of the emissions test
Exhaust smell stronger than usual
Engine running normally in most cases
Common causes
NOx sensor or downstream oxygen sensor giving wrong readings
Leaks in the exhaust system before the trap
Poor quality or high-sulphur fuel
Mixture or injection problems fouling the trap
Trap regeneration strategy not completing
What to do
How to read code P2000
This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.
The code P2000 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (00) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P2000 mean?
NOx trap efficiency below threshold, bank 1. The control unit detected that the system that stores and reduces nitrogen oxides (NOx trap, or NOx adsorber) on bank 1 is not working at the expected efficiency. This means part of the nitrogen oxides is passing into the exhaust untreated. Bank 1 is the side of the engine where cylinder number 1 is located.
Can I keep driving with code P2000 active?
With caution: limp mode possible, have it checked soon
Common causes — P2000
Aged or saturated NOx trap NOx sensor or downstream oxygen sensor giving wrong readings Leaks in the exhaust system before the trap Poor quality or high-sulphur fuel Mixture or injection problems fouling the trap Trap regeneration strategy not completing
How do you fix code P2000?
The problem generally does not stop you driving, but it should not be left for long because the car pollutes more. Have the sensors and exhaust leaks checked first, before suspecting the trap. Do not clear the code to make it disappear.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P1918 — Transmission range display circuit malfunction
- Next code: P2001 — NOx trap efficiency below threshold, bank 2
Related codes
- P2001 — NOx trap efficiency below threshold, bank 2
- P2002 — Diesel particulate filter (DPF) clogged
- P2003 — Particulate filter efficiency below threshold, bank 2
- P2004 — Intake manifold runner control stuck open, bank 1
- P2005 — Intake runner control stuck open (bank 2)
- P2006 — Intake runner control stuck closed (bank 1)
- P2007 — Intake runner control stuck closed (bank 2)
- P2008 — Intake runner control circuit open (bank 1)
- P2009 — Intake runner control circuit low (bank 1)
- P200A — P200A: meaning is manufacturer dependent, needs verifying
- P200B — P200B: meaning is manufacturer dependent, needs verifying
- P200C — P200C: definition uncertain, manufacturer dependent