P211D — Throttle body B: range or performance fault
| Meaning | The engine computer finds that throttle B does not move or position itself as commanded, within tolerances. It may be dirty, worn or not calibrated. B refers to a second throttle body or actuator, and which one depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Rough idle
Delayed or jerky pedal response
Reduced power or limp mode
Stalling at low rpm
Common causes
Wear of the motor or gears
Relearn not done after cleaning or replacement
Vacuum leaks
Connector or wiring with poor contact
Position sensors with inconsistent signals
What to do
How to read code P211D
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P211D starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (1) points to fuel and air metering, and the last two (1D) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P211D mean?
Throttle body B: range or performance fault. The engine computer finds that throttle B does not move or position itself as commanded, within tolerances. It may be dirty, worn or not calibrated. B refers to a second throttle body or actuator, and which one depends on the manufacturer.
Can I keep driving with code P211D active?
With caution: limp mode possible, have it checked soon
Common causes — P211D
Dirt deposits in throttle body B Wear of the motor or gears Relearn not done after cleaning or replacement Vacuum leaks Connector or wiring with poor contact Position sensors with inconsistent signals
How do you fix code P211D?
Check cleanliness and movement of throttle B and have the relearn done with the diagnostic tool. Also check for vacuum leaks. If power is reduced, drive carefully.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P211C — Throttle actuator B: motor current out of range
- Next code: P211E — Throttle actuator B control: processor error
Related codes
- P2100 — Throttle actuator motor circuit open
- P2101 — Throttle actuator motor circuit range/performance
- P2102 — Throttle actuator motor circuit low
- P2103 — Throttle actuator motor circuit high
- P2104 — Throttle actuator control system forced idle
- P2105 — Throttle actuator control system forced engine shutdown
- P2106 — Throttle actuator control system forced limited power
- P2107 — Throttle actuator control module processor fault
- P2108 — Throttle actuator control module performance
- P2109 — Throttle/pedal sensor A minimum stop performance
- P210A — Starter lockout relay K38/3: short circuit or open wiring
- P210B — Throttle actuator B control motor circuit range/performance