P2166 — Throttle/Pedal Position Sensor "D" Maximum Stop Performance
| Meaning | Throttle/Pedal Position Sensor "D" Maximum Stop Performance. |
| Family | Powertrain (P) |
How to read code P2166
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P2166 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (1) points to fuel and air metering, and the last two (66) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P2166 mean?
Throttle/Pedal Position Sensor "D" Maximum Stop Performance.
Can I keep driving with code P2166 active?
With caution: limp mode possible, have it checked soon
How do you fix code P2166?
Diagnosis starts from reading the live ECU parameters: the code points to the fault area, not to the part to replace. A vehicle-electronics specialist can test the component and clear the code after the repair.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P2165 — Throttle/Pedal Position Sensor "C" Maximum Stop Pe...
- Next code: P2167 — Throttle/Pedal Position Sensor "E" Maximum Stop Pe...
Related codes
- P2100 — Throttle Actuator Control Motor Circuit/Open
- P2101 — Throttle Actuator Control Motor Circuit Range/Performance
- P2102 — Throttle Actuator Control Motor Circuit Low
- P2103 — Throttle Actuator Control Motor Circuit High
- P2104 — Throttle Actuator Control System - Forced Idle
- P2105 — Throttle Actuator Control System - Forced Engine Shutdown
- P2106 — Throttle Actuator Control System - Forced Limited Power
- P2107 — Throttle Actuator Control Module Processor
- P2108 — Throttle Actuator Control Module Performance
- P2109 — Throttle/Pedal Position Sensor "A" Minimum Stop Performance
- P210A — The cable to component K38/3(Starter lockout relay) has shor...
- P2110 — Throttle Actuator Control System - Forced Limited RPM