Skip to content
Fault code dictionary (DTC)

P21BF — Cold start injection timing, cylinder 10

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected a problem with the injection timing of cylinder 10 during a cold start. The exact meaning of this code is defined by the manufacturer and I don't have reliable information for every make. In general it means injection in that cylinder is not within expected values when the engine is cold.
FamilyPowertrain (P)

Typical symptoms

Hard or long cold starting
Rough running in the first minutes
Unusual smoke from the exhaust when cold
Check engine light on
Vibration or knocking when cold

Common causes

Faulty or dirty cylinder 10 injector
Wiring or connector problem at the injector
Engine temperature sensor giving wrong readings
Incorrect fuel pressure
Timing or synchronization problem
ECU software needing an update

What to do

Have the cold-start injection data read and the cylinder 10 injector and connectors checked. You can drive carefully for short trips, but if the engine runs badly or shakes a lot, stop and have it checked.

How to read code P21BF

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P21BF starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (1) points to fuel and air metering, and the last two (BF) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P21BF mean?

Cold start injection timing, cylinder 10. The control unit detected a problem with the injection timing of cylinder 10 during a cold start. The exact meaning of this code is defined by the manufacturer and I don't have reliable information for every make. In general it means injection in that cylinder is not within expected values when the engine is cold.

Can I keep driving with code P21BF active?

With caution: limp mode possible, have it checked soon

Common causes — P21BF

Faulty or dirty cylinder 10 injector Wiring or connector problem at the injector Engine temperature sensor giving wrong readings Incorrect fuel pressure Timing or synchronization problem ECU software needing an update

How do you fix code P21BF?

Have the cold-start injection data read and the cylinder 10 injector and connectors checked. You can drive carefully for short trips, but if the engine runs badly or shakes a lot, stop and have it checked.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes