Skip to content
Fault code dictionary (DTC)

P22A3 — NOx sensor heater control circuit open or faulty, bank 1 sensor 2

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected a fault in the control of the NOx sensor's internal heater, or an open circuit. The heater brings the sensor up to working temperature quickly; without it, the sensor cannot measure properly. The exact meaning of 'sensor 2' depends on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Emission system fault warning
Possible power limitation
AdBlue-related message
Failed emissions test

Common causes

Faulty internal heater in the NOx sensor
Broken connector or wiring
Missing fuse or heater supply
Faulty sensor control module
Faulty engine control unit (rare)

What to do

Check the fuses, connector and wiring of the sensor. If the sensor is faulty it generally needs replacing: have a diagnosis done to confirm it, without clearing the code.

How to read code P22A3

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P22A3 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (2) points to fuel and air metering (injector circuit), and the last two (A3) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P22A3 mean?

NOx sensor heater control circuit open or faulty, bank 1 sensor 2. The control unit detected a fault in the control of the NOx sensor's internal heater, or an open circuit. The heater brings the sensor up to working temperature quickly; without it, the sensor cannot measure properly. The exact meaning of 'sensor 2' depends on the manufacturer.

Can I keep driving with code P22A3 active?

With caution: limp mode possible, have it checked soon

Common causes — P22A3

Faulty internal heater in the NOx sensor Broken connector or wiring Missing fuse or heater supply Faulty sensor control module Faulty engine control unit (rare)

How do you fix code P22A3?

Check the fuses, connector and wiring of the sensor. If the sensor is faulty it generally needs replacing: have a diagnosis done to confirm it, without clearing the code.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes