P22CC — Turbo compressor outlet switching valve control circuit high
| Meaning | The engine computer sees too high a voltage in the control circuit of the switching valve linked to the turbocharger compressor outlet. It may be caused by a wire touching a power supply or a valve fault. The valve may not work as intended. |
| Family | Powertrain (P) |
Typical symptoms
Possible loss of power
Irregular turbo response
Reduced-power mode in some cases
Common causes
Failed solenoid valve
Damaged or corroded connector
Wiring damaged by heat
Faulty engine computer, uncommon
What to do
How to read code P22CC
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P22CC starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (2) points to fuel and air metering (injector circuit), and the last two (CC) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P22CC mean?
Turbo compressor outlet switching valve control circuit high. The engine computer sees too high a voltage in the control circuit of the switching valve linked to the turbocharger compressor outlet. It may be caused by a wire touching a power supply or a valve fault. The valve may not work as intended.
Can I keep driving with code P22CC active?
With caution: limp mode possible, have it checked soon
Common causes — P22CC
Wire touching a power supply Failed solenoid valve Damaged or corroded connector Wiring damaged by heat Faulty engine computer, uncommon
How do you fix code P22CC?
Check the connector and wires of the valve for burn marks or wires in contact. If you notice a loss of power, drive carefully and have it checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P22CB — Turbo compressor outlet switching valve control ci...
- Next code: P22CD — Turbo compressor outlet switching valve stuck open
Related codes
- P2200 — NOx sensor circuit fault, bank 1
- P2201 — NOx sensor circuit range/performance, bank 1
- P2202 — NOx sensor circuit low input, bank 1
- P2203 — NOx sensor circuit high input, bank 1
- P2204 — NOx sensor intermittent signal, bank 1
- P2205 — NOx sensor heater control circuit open, bank 1
- P2206 — NOx sensor heater control circuit low, bank 1
- P2207 — NOx sensor heater control circuit high, bank 1
- P2208 — NOx sensor heater sense circuit, bank 1
- P2209 — NOx sensor heater sense circuit out of range, bank 1
- P220A — Speed signal comparison implausible, Y3/6n2 and Y3/6n3
- P220B — Speed too high, Y3/6n2 or Y3/6n3