Skip to content
Fault code dictionary (DTC)

P2349 — Cylinder 9 pressure sensor signal out of range

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine computer receives from the cylinder 9 pressure sensor a signal that does not match what it expects at that moment. The circuit is not necessarily broken: the value read simply does not make sense for how the engine is running. The exact meaning depends on the manufacturer and I cannot be more specific without knowing the make.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Irregular idle
Occasional power drops
Less smooth running at mid revs
No obvious symptoms in mild cases

Common causes

Cylinder 9 pressure sensor aged or fouled with deposits
Connector or wiring with a poor contact
A real mechanical problem in the cylinder that changes the pressure
Electrical interference on the wiring
Engine control unit, in rare cases

What to do

Have the sensor and its wiring checked first, then compare the reading with the other cylinders. It is not an immediate emergency, but do not ignore it for long, because the signal may point to a real combustion problem.

How to read code P2349

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P2349 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (3) points to ignition system or misfire, and the last two (49) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P2349 mean?

Cylinder 9 pressure sensor signal out of range. The engine computer receives from the cylinder 9 pressure sensor a signal that does not match what it expects at that moment. The circuit is not necessarily broken: the value read simply does not make sense for how the engine is running. The exact meaning depends on the manufacturer and I cannot be more specific without knowing the make.

Can I keep driving with code P2349 active?

With caution: limp mode possible, have it checked soon

Common causes — P2349

Cylinder 9 pressure sensor aged or fouled with deposits Connector or wiring with a poor contact A real mechanical problem in the cylinder that changes the pressure Electrical interference on the wiring Engine control unit, in rare cases

How do you fix code P2349?

Have the sensor and its wiring checked first, then compare the reading with the other cylinders. It is not an immediate emergency, but do not ignore it for long, because the signal may point to a real combustion problem.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes