Skip to content
Fault code dictionary (DTC)

P2364 — Cylinder 11: pressure variation too high

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected that the pressure in cylinder 11 varies from one cycle to the next more than expected. It indicates uneven combustion in that cylinder, or a sensor with a noisy signal. The code is standard and applies to very rare engines with 11 or more cylinders.
FamilyPowertrain (P)

Typical symptoms

Vibration or uneven running
Loss of power
Check engine light on
Unusual engine noise
Irregular fuel consumption
Jerking when accelerating

Common causes

Cylinder 11 injector delivering unevenly
Worn spark plug or coil on cylinder 11
Carbon deposits or a sealing problem in the cylinder
Pressure sensor with a noisy signal
Mechanical problem, such as valves or rings
Outdated control unit software

What to do

Have the live data read to see whether the problem is only on cylinder 11. Check that cylinder's spark plug, coil and injector first. Prolonged uneven combustion can damage the catalytic converter, so do not wait too long.

How to read code P2364

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P2364 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (3) points to ignition system or misfire, and the last two (64) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P2364 mean?

Cylinder 11: pressure variation too high. The control unit detected that the pressure in cylinder 11 varies from one cycle to the next more than expected. It indicates uneven combustion in that cylinder, or a sensor with a noisy signal. The code is standard and applies to very rare engines with 11 or more cylinders.

Can I keep driving with code P2364 active?

With caution: limp mode possible, have it checked soon

Common causes — P2364

Cylinder 11 injector delivering unevenly Worn spark plug or coil on cylinder 11 Carbon deposits or a sealing problem in the cylinder Pressure sensor with a noisy signal Mechanical problem, such as valves or rings Outdated control unit software

How do you fix code P2364?

Have the live data read to see whether the problem is only on cylinder 11. Check that cylinder's spark plug, coil and injector first. Prolonged uneven combustion can damage the catalytic converter, so do not wait too long.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes