Skip to content
Fault code dictionary (DTC)

P2395 — Diesel intake air flow B control: stuck closed

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detects that the second intake air regulating device on diesel engines ("B") stays closed even when it should open. It may be a mechanical jam, usually from deposits, or an actuator that can't cope. Which component it is depends on the manufacturer, and for some brands I have no reliable information.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Loss of power
Rough idle
Black or abnormal exhaust smoke
Limp mode on some cars
Starting sometimes harder

Common causes

Valve or flap jammed by soot
Broken or too weak actuator
Seized or broken linkage or pivot
Position sensor reporting a wrong value
Oil and dirt deposits in the intake duct
Faulty wiring or connector

What to do

Have the valve and duct inspected to see whether it's jammed by deposits, and check with a scan tool whether it moves when commanded. If power drops a lot, avoid pushing on and have the car checked soon.

How to read code P2395

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P2395 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (3) points to ignition system or misfire, and the last two (95) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P2395 mean?

Diesel intake air flow B control: stuck closed. The control unit detects that the second intake air regulating device on diesel engines ("B") stays closed even when it should open. It may be a mechanical jam, usually from deposits, or an actuator that can't cope. Which component it is depends on the manufacturer, and for some brands I have no reliable information.

Can I keep driving with code P2395 active?

With caution: limp mode possible, have it checked soon

Common causes — P2395

Valve or flap jammed by soot Broken or too weak actuator Seized or broken linkage or pivot Position sensor reporting a wrong value Oil and dirt deposits in the intake duct Faulty wiring or connector

How do you fix code P2395?

Have the valve and duct inspected to see whether it's jammed by deposits, and check with a scan tool whether it moves when commanded. If power drops a lot, avoid pushing on and have the car checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes