P2577 — Ozone reduction catalyst efficiency below threshold
| Meaning | The control unit estimated that the ozone reduction catalyst, a special coating fitted on only some models, is working less than expected. It can be due to an aged or dirty coating, or to a sensor giving wrong readings. The exact meaning depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Usually no obvious driving symptoms
Other codes on the catalyst sensors may be stored
Possible failure at the inspection
Common causes
Faulty monitoring sensor
Dirty or damaged coated radiator or component
Sensor wiring or connector problems
Control unit problem (rare)
What to do
How to read code P2577
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P2577 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (77) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P2577 mean?
Ozone reduction catalyst efficiency below threshold. The control unit estimated that the ozone reduction catalyst, a special coating fitted on only some models, is working less than expected. It can be due to an aged or dirty coating, or to a sensor giving wrong readings. The exact meaning depends on the manufacturer.
Can I keep driving with code P2577 active?
With caution: limp mode possible, have it checked soon
Common causes — P2577
Aged or contaminated catalyst coating Faulty monitoring sensor Dirty or damaged coated radiator or component Sensor wiring or connector problems Control unit problem (rare)
How do you fix code P2577?
Before blaming the catalyst, have the sensors, connectors and wiring checked, then the physical condition of the coated component. It will not stop the car, but the warning light should be checked reasonably soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P2576 — Ozone catalyst deterioration sensor signal intermi...
- Next code: P2578 — Turbocharger speed sensor A circuit fault
Related codes
- P2500 — Generator lamp / L-terminal circuit low
- P2501 — Generator lamp / L-terminal circuit high
- P2502 — Charging system voltage out of range
- P2503 — Charging system voltage too low
- P2504 — Charging system voltage too high
- P2505 — Engine control unit power input signal fault
- P2506 — Control unit power input signal out of range
- P2507 — Control unit power input signal too low
- P2508 — Control unit power input signal too high
- P2509 — Control unit power input signal intermittent
- P250A — Engine oil level sensor circuit fault
- P250B — Engine oil level sensor range/performance fault