P25AF — Coolant temperature control module requested warning light
| Meaning | The module that manages coolant temperature asked the engine control unit to turn on the check engine light. This code says that module found a problem, but it does not say which one by itself. The real fault has to be found by reading the other codes stored in that module. |
| Family | Powertrain (P) |
Typical symptoms
Abnormal or unstable coolant temperature
Fan running too much or too little
Insufficient cabin heating
Possible power limitation
Common causes
Faulty temperature sensor or electronic thermostat
Faulty electrically controlled coolant pump
Module wiring or connectors
Low coolant level
What to do
How to read code P25AF
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P25AF starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (AF) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P25AF mean?
Coolant temperature control module requested warning light. The module that manages coolant temperature asked the engine control unit to turn on the check engine light. This code says that module found a problem, but it does not say which one by itself. The real fault has to be found by reading the other codes stored in that module.
Can I keep driving with code P25AF active?
With caution: limp mode possible, have it checked soon
Common causes — P25AF
Fault detected by the temperature management module Faulty temperature sensor or electronic thermostat Faulty electrically controlled coolant pump Module wiring or connectors Low coolant level
How do you fix code P25AF?
Check the coolant level with the engine cold and watch the temperature gauge. Have the module's own codes read as well, and stop driving if the temperature climbs abnormally.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P25AE — Piston cooling oil pressure too low
- Next code: P25B0 — Fuel level sensor A: signal stuck
Related codes
- P2500 — Generator lamp / L-terminal circuit low
- P2501 — Generator lamp / L-terminal circuit high
- P2502 — Charging system voltage out of range
- P2503 — Charging system voltage too low
- P2504 — Charging system voltage too high
- P2505 — Engine control unit power input signal fault
- P2506 — Control unit power input signal out of range
- P2507 — Control unit power input signal too low
- P2508 — Control unit power input signal too high
- P2509 — Control unit power input signal intermittent
- P250A — Engine oil level sensor circuit fault
- P250B — Engine oil level sensor range/performance fault