P25B1 — Fuel level sensor B: signal stuck
| Meaning | The control unit sees that the signal from fuel level sensor B does not change, even though the level should vary. Sensor B is the second sensor, fitted when the tank has more than one (for example a two-sided tank). The displayed level may therefore be wrong. |
| Family | Powertrain (P) |
Typical symptoms
Fuel gauge not moving as it should
Displayed level not matching the real one
Unreliable remaining range
Low-fuel light coming on at odd times
Common causes
Worn sensor
Sensor B connector or wiring
Dirty or worn resistive track
Problem with the tank module
What to do
How to read code P25B1
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P25B1 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (B1) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P25B1 mean?
Fuel level sensor B: signal stuck. The control unit sees that the signal from fuel level sensor B does not change, even though the level should vary. Sensor B is the second sensor, fitted when the tank has more than one (for example a two-sided tank). The displayed level may therefore be wrong.
Can I keep driving with code P25B1 active?
With caution: limp mode possible, have it checked soon
Common causes — P25B1
Second sensor float stuck Worn sensor Sensor B connector or wiring Dirty or worn resistive track Problem with the tank module
How do you fix code P25B1?
Do not trust the gauge, and note the distance since the last fill-up so you do not run dry. Have the sensor checked as soon as possible.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P25B0 — Fuel level sensor A: signal stuck
- Next code: P25B2 — Fuel level sensor A or B: signal stuck
Related codes
- P2500 — Generator lamp / L-terminal circuit low
- P2501 — Generator lamp / L-terminal circuit high
- P2502 — Charging system voltage out of range
- P2503 — Charging system voltage too low
- P2504 — Charging system voltage too high
- P2505 — Engine control unit power input signal fault
- P2506 — Control unit power input signal out of range
- P2507 — Control unit power input signal too low
- P2508 — Control unit power input signal too high
- P2509 — Control unit power input signal intermittent
- P250A — Engine oil level sensor circuit fault
- P250B — Engine oil level sensor range/performance fault