P25B5 — Turbo wastegate B: stuck open
| Meaning | The wastegate is the valve that bleeds off part of the exhaust gas to limit turbo pressure. The control unit detects that wastegate B, the second one on the engine, stays open when it should close. Boost pressure does not rise as requested. |
| Family | Powertrain (P) |
Typical symptoms
Lack of power when accelerating
Turbo seems to do little
Fuel consumption may rise
Possible reduced operation
Common causes
Broken or worn linkage
Leaking vacuum or pressure hose
Faulty control solenoid
Actuator electrical connection
Deposits in the wastegate
What to do
How to read code P25B5
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P25B5 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (5) points to vehicle speed, idle control and auxiliary inputs, and the last two (B5) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P25B5 mean?
Turbo wastegate B: stuck open. The wastegate is the valve that bleeds off part of the exhaust gas to limit turbo pressure. The control unit detects that wastegate B, the second one on the engine, stays open when it should close. Boost pressure does not rise as requested.
Can I keep driving with code P25B5 active?
With caution: limp mode possible, have it checked soon
Common causes — P25B5
Faulty or seized wastegate B actuator Broken or worn linkage Leaking vacuum or pressure hose Faulty control solenoid Actuator electrical connection Deposits in the wastegate
How do you fix code P25B5?
Check the hoses, connections and actuator linkage for leaks and play. You can keep driving with less power, but have it checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P25B4 — Turbo wastegate A: stuck closed
- Next code: P25B6 — Turbo wastegate B: stuck closed
Related codes
- P2500 — Generator lamp / L-terminal circuit low
- P2501 — Generator lamp / L-terminal circuit high
- P2502 — Charging system voltage out of range
- P2503 — Charging system voltage too low
- P2504 — Charging system voltage too high
- P2505 — Engine control unit power input signal fault
- P2506 — Control unit power input signal out of range
- P2507 — Control unit power input signal too low
- P2508 — Control unit power input signal too high
- P2509 — Control unit power input signal intermittent
- P250A — Engine oil level sensor circuit fault
- P250B — Engine oil level sensor range/performance fault