Skip to content
Fault code dictionary (DTC)

P269F — Exhaust glow plug: open circuit

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detects no continuity in the electrical circuit of the glow plug fitted in the exhaust, used to help filter regeneration. The circuit is open: the glow plug does not heat up.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Particulate filter regeneration not starting or incomplete
Particulate filter warning light on
Loss of power
Engine running in reduced-power mode

Common causes

Burnt-out or broken glow plug
Connector loose or corroded
Wire broken by heat or vibration
Blown fuse
Fault in the control

What to do

Have the glow plug, connector and wiring checked. A broken glow plug usually needs replacing: do not ignore this for long because of the filter.

How to read code P269F

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P269F starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (9F) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P269F mean?

Exhaust glow plug: open circuit. The control unit detects no continuity in the electrical circuit of the glow plug fitted in the exhaust, used to help filter regeneration. The circuit is open: the glow plug does not heat up.

Can I keep driving with code P269F active?

With caution: limp mode possible, have it checked soon

Common causes — P269F

Burnt-out or broken glow plug Connector loose or corroded Wire broken by heat or vibration Blown fuse Fault in the control

How do you fix code P269F?

Have the glow plug, connector and wiring checked. A broken glow plug usually needs replacing: do not ignore this for long because of the filter.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes