Skip to content
Fault code dictionary (DTC)

P2713 — Pressure control solenoid D

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThis is the generic code concerning the pressure control solenoid labelled D in the automatic gearbox. On its own it doesn't specify the type of fault: the other stored codes need to be looked at. What function valve D has depends on the manufacturer, and I can't state it for certain.
FamilyPowertrain (P)

Typical symptoms

Harsh or delayed shifts
A gear slipping
Transmission warning light on
Gearbox in limp mode
Irregular oil pressure felt as jerks

Common causes

Solenoid D with wear or internal dirt
Damaged gearbox wiring or connector
Degraded or contaminated gearbox fluid
Pressure problem in the hydraulic circuit
Faulty transmission control unit, rare

What to do

Have the other gearbox codes read as well, since they help identify the type of fault. First check the fluid, wiring and connectors. If the gearbox slips or goes into limp mode, limit use of the car.

How to read code P2713

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P2713 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (7) points to transmission, and the last two (13) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P2713 mean?

Pressure control solenoid D. This is the generic code concerning the pressure control solenoid labelled D in the automatic gearbox. On its own it doesn't specify the type of fault: the other stored codes need to be looked at. What function valve D has depends on the manufacturer, and I can't state it for certain.

Can I keep driving with code P2713 active?

With caution: limp mode possible, have it checked soon

Common causes — P2713

Solenoid D with wear or internal dirt Damaged gearbox wiring or connector Degraded or contaminated gearbox fluid Pressure problem in the hydraulic circuit Faulty transmission control unit, rare

How do you fix code P2713?

Have the other gearbox codes read as well, since they help identify the type of fault. First check the fluid, wiring and connectors. If the gearbox slips or goes into limp mode, limit use of the car.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes