P272D — Park pawl motor control circuit current too high
| Meaning | The control unit detected that the park pawl motor is drawing too much current. It can indicate a mechanism struggling to move or an electrical fault. The exact component varies from make to make. |
| Family | Powertrain (P) |
Typical symptoms
Transmission or parking brake warning light on
Noises from the gearbox when selecting P
Fault message on the display
Car not releasing from the P position
Common causes
Motor with shorted windings
Shorted wiring or damaged insulation
Abnormal supply voltage
Faulty transmission control unit (uncommon)
What to do
How to read code P272D
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P272D starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (7) points to transmission, and the last two (2D) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P272D mean?
Park pawl motor control circuit current too high. The control unit detected that the park pawl motor is drawing too much current. It can indicate a mechanism struggling to move or an electrical fault. The exact component varies from make to make.
Can I keep driving with code P272D active?
With caution: limp mode possible, have it checked soon
Common causes — P272D
Stiff or jammed lock mechanism Motor with shorted windings Shorted wiring or damaged insulation Abnormal supply voltage Faulty transmission control unit (uncommon)
How do you fix code P272D?
Do not force the lever if the lock is stiff. Always use the handbrake and do not leave the car on a slope until it has been checked. Verify the battery and wiring, then have the actuator checked.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P272C — Park pawl motor control circuit fault
- Next code: P2730 — Pressure solenoid 'E' control circuit voltage high
Related codes
- P2700 — Transmission friction element A apply time out of range
- P2701 — Transmission friction element B apply time out of range
- P2702 — Transmission friction element C apply time out of range
- P2703 — Transmission friction element D apply time out of range
- P2704 — Transmission friction element E apply time out of range
- P2705 — Transmission friction element F apply time out of range
- P2706 — Shift solenoid F: general fault
- P2707 — Shift solenoid F: performance or stuck off
- P2708 — Shift solenoid F: stuck on
- P2709 — Shift solenoid F: electrical fault
- P270A — Transmission friction element A temperature too high
- P270B — Transmission friction element B temperature too high