P289A — Cylinder 3 Ion Current Sense Circuit Low
| Meaning | Cylinder 3 Ion Current Sense Circuit Low. |
| Family | Powertrain (P) |
How to read code P289A
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P289A starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (8) points to transmission, and the last two (9A) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P289A mean?
Cylinder 3 Ion Current Sense Circuit Low.
Can I keep driving with code P289A active?
With caution: limp mode possible, have it checked soon
How do you fix code P289A?
Diagnosis starts from reading the live ECU parameters: the code points to the fault area, not to the part to replace. A vehicle-electronics specialist can test the component and clear the code after the repair.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P2899 — Cylinder 3 Ion Current Sense Circuit Range/Perform...
- Next code: P289B — Cylinder 3 Ion Current Sense Circuit High
Related codes
- P2800 — Transmission Range Sensor B Circuit (PRNDL Input)
- P2801 — Transmission Range Sensor B Circuit Range/Performance
- P2802 — Transmission Range Sensor B Circuit Low
- P2803 — Transmission Range Sensor B Circuit High
- P2804 — Transmission Range Sensor B Circuit Intermittent
- P2805 — Transmission Range Sensor A/B Correlation
- P2806 — TRANSMISSION RANGE SENSOR ALIGNMENT
- P2807 — Pressure Control Solenoid G
- P2808 — Pressure Control Solenoid G Performance/Stuck Off
- P2809 — Pressure Control Solenoid G Stuck On
- P280A — Transmission Range Sensor A Circuit Not Learned
- P280B — Transmission Range Sensor B Circuit Not Learned