P28C0 — Ion sense module supply voltage circuit fault
| Meaning | The ion sensing module lets the engine computer read combustion through the spark plugs. The computer found a general problem with the voltage feeding this module, without saying if it is too low or too high. While the module is not properly powered, the signals for all the cylinders connected to it may be unreliable. Module location and wiring depend on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Rough idle
Jerking or hesitation
Possible misfires on several cylinders
Other ion current codes stored at the same time
Common causes
Corroded or loose module connector or ground
Damaged supply wiring
Weak battery or irregular charging system
Faulty sensing module or engine computer (rare)
What to do
How to read code P28C0
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P28C0 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (8) points to transmission, and the last two (C0) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P28C0 mean?
Ion sense module supply voltage circuit fault. The ion sensing module lets the engine computer read combustion through the spark plugs. The computer found a general problem with the voltage feeding this module, without saying if it is too low or too high. While the module is not properly powered, the signals for all the cylinders connected to it may be unreliable. Module location and wiring depend on the manufacturer.
Can I keep driving with code P28C0 active?
With caution: limp mode possible, have it checked soon
Common causes — P28C0
Fuse or relay feeding the module has a problem Corroded or loose module connector or ground Damaged supply wiring Weak battery or irregular charging system Faulty sensing module or engine computer (rare)
How do you fix code P28C0?
First check the fuses, grounds and connectors of the module, and the battery and alternator voltage. With a steady light, drive carefully and not far. If the engine jerks or the light flashes, stop.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P28BF — Cylinder 12 ion current signal too high
- Next code: P28C1 — Ion sense module supply voltage too low
Related codes
- P2800 — Range sensor B circuit (PRNDL input) fault
- P2801 — Range sensor B circuit: implausible signal
- P2802 — Range sensor B circuit: signal too low
- P2803 — Range sensor B circuit: signal too high
- P2804 — Range sensor B circuit: intermittent signal
- P2805 — Range sensors A and B: signals do not agree
- P2806 — Transmission range sensor: misalignment
- P2807 — Pressure control solenoid G circuit fault
- P2808 — Pressure solenoid G: performance fault or stuck off
- P2809 — Pressure solenoid G: stuck on
- P280A — Range sensor A circuit: not learned
- P280B — Transmission range sensor B: not learned