Skip to content
Fault code dictionary (DTC)

P2A43 — Alternative fuel tank B pressure sensor signal low

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit receives a voltage from the tank B pressure sensor that is lower than the expected minimum. This usually means a wire shorted to ground, a missing supply or a faulty sensor.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Gas gauge reading empty
Switching to petrol
Tank B cannot be used
Reduced range on gas

Common causes

Signal wire touching ground
Corroded or unplugged connector
Faulty pressure sensor
Missing sensor supply voltage
Rarely, a control unit fault

What to do

Check the sensor connector and wiring, looking for pinched or chafed wires. You can drive on petrol, but have it diagnosed with a scan tool at a workshop that knows gas systems.

How to read code P2A43

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P2A43 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (43) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P2A43 mean?

Alternative fuel tank B pressure sensor signal low. The control unit receives a voltage from the tank B pressure sensor that is lower than the expected minimum. This usually means a wire shorted to ground, a missing supply or a faulty sensor.

Can I keep driving with code P2A43 active?

With caution: limp mode possible, have it checked soon

Common causes — P2A43

Signal wire touching ground Corroded or unplugged connector Faulty pressure sensor Missing sensor supply voltage Rarely, a control unit fault

How do you fix code P2A43?

Check the sensor connector and wiring, looking for pinched or chafed wires. You can drive on petrol, but have it diagnosed with a scan tool at a workshop that knows gas systems.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes