Skip to content
Fault code dictionary (DTC)

P2A5C — Vaporizer C outlet temperature sensor signal too low

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit reads too low a voltage on the circuit of the vaporizer C outlet temperature sensor. Usually the signal is shorted to ground, or the sensor has failed. The meaning of C is set by the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Automatic return to petrol
Gas will not engage
Irregular running on gas
Possible limited operation

Common causes

Signal wire shorted to ground
Wet or corroded connector
Faulty temperature sensor
Pinched or chafed wiring
Faulty control unit

What to do

Check the wiring route and the sensor connector, looking for pinched spots or contact with metal. A technician can confirm with voltage measurements whether the fault is in the wire or the sensor. Meanwhile use petrol.

How to read code P2A5C

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P2A5C starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (5C) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P2A5C mean?

Vaporizer C outlet temperature sensor signal too low. The control unit reads too low a voltage on the circuit of the vaporizer C outlet temperature sensor. Usually the signal is shorted to ground, or the sensor has failed. The meaning of C is set by the manufacturer.

Can I keep driving with code P2A5C active?

With caution: limp mode possible, have it checked soon

Common causes — P2A5C

Signal wire shorted to ground Wet or corroded connector Faulty temperature sensor Pinched or chafed wiring Faulty control unit

How do you fix code P2A5C?

Check the wiring route and the sensor connector, looking for pinched spots or contact with metal. A technician can confirm with voltage measurements whether the fault is in the wire or the sensor. Meanwhile use petrol.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes